MILLIBEAM introduces the H8QR1G9fVB surface-mount dual-band Ku-band antenna-in-package for SATCOM phased arrays

June 11, 2026

MILLIBEAM introduces the H8QR1G9fVB surface-mount dual-band Ku-band antenna-in-package for SATCOM phased arrays

A compact surface-mount dual-band Ku-band antenna-in-package, built as a repeatable unit cell for scalable SATCOM phased arrays. 7 by 7 by 5.5 mm, SMT-mountable, downlink 10.7 to 12.7 GHz and uplink 14.0 to 14.5 GHz.

MILLIBEAM H8QR1G9fVB dual-band Ku-band antenna-in-package overview

As Ku-band SATCOM terminals move toward scalable phased arrays, the PCB-embedded antenna has become a design bottleneck. The H8QR1G9fVB from the MILLIBEAM HEAVISIDE portfolio changes that. It is a compact surface-mount antenna-in-package (AiP), built as a repeatable unit cell for next-generation satellite connectivity, that solders directly onto standard PCBs using conventional SMT processes. The antenna becomes a standard electronic component: scalable, manufacturable and reusable.

‍

⚙️ Key performance

‍
Dual-band Ku operation: downlink 10.7 to 12.7 GHz, uplink 14.0 to 14.5 GHz. Embedded antenna gain up to 6.7 dBi on the downlink and 7.6 dBi on the uplink. Radiation efficiency above 90 percent. Cross-polarisation discrimination above 20 dB. Beam steering up to plus/minus 50 degrees in rectangular or triangular planar arrays, with minimised mutual coupling between adjacent AiP units.

‍

🔩 Saving valuable PCB real estate

‍
Finding space for beamformers, LNAs, PAs and routing is a constant battle. Measuring just 7.0 mm by 7.0 mm by 5.5 mm, the H8QR1G9fVB solders right next to the chip, avoiding PCB routing challenges and minimising interconnect and track losses. That frees critical space within the array environment for other SMT components, without compromising performance.

‍

🔬 Decoupled from the motherboard

‍
Traditional embedded antennas require a costly redesign whenever the board stack-up changes. The H8QR1G9fVB decouples the antenna from the board and holds stable performance across a wide range of layouts: microstrip, stripline, CPW and CPWG feed lines, PCB thickness from 0.12 mm to 5.0 mm, and dielectric constant from 2.2 to 4.4. By encapsulating the antenna in a pre-qualified ceramic AiP, the motherboard can focus on RF distribution, beamforming and thermal management. The result is simpler stack-ups, lower design risk and faster time to market.

‍

📈 Built for high-volume manufacturing

‍
Standard SMT automated pick-and-place, with manual prototyping supported. Robust material construction with high thermal capacity. High alignment tolerance up to plus/minus 0.25 mm in the X and Y directions. Peak reflow temperature of 260 degrees C. Input power handling up to 25 W.

It is time to treat the antenna like any other standard electronic component: scalable, manufacturable and reusable. The H8QR1G9fVB is part of the MILLIBEAM HEAVISIDE portfolio. Simulation models and evaluation units are available. Request a datasheet or sample.

Acknowledgment of Country - MILLIBEAM acknowledges the Traditional Custodians of the lands throughout Australia where we live and work today. We celebrate the diversity of Aboriginal peoples and their ongoing cultures and connections to land, sea and community. We pay our respects to the Elders both past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.

Aboriginal and Torres Strait Islander artwork